 |
|
Finally got the E30 home and am chomping at the bit to get started on it! Most immediate items that need replacement are: both front lower ctrl arms, RR wheel bearing, a few significant leaks and probably rod bearings. The front end is pretty much shot, so I am looking for all bushings, ctrl arms, tie rods, and etc. Is there a master bushing kit available? Driver seat is broken on the back support and my local yard doesn’t have a seat so I need to find one. Thanks, Wes
[/url]
[/img]
W.Jones wrote:
[quote]Finally got the E30 home and am chomping at the bit to get started on it! Most immediate items that need replacement are: both front lower ctrl arms, RR wheel bearing, a few significant leaks and probably rod bearings. The front end is pretty much shot, so I am looking for all bushings, ctrl arms, tie rods, and etc. Is there a master bushing kit available? Driver seat is broken on the back support and my local yard doesn’t have a seat so I need to find one. Thanks, Wes
[/url]
[/img][/quote]No master bushing set that I know of.Call one of the forum or Sanction sponsors and they will hook you up with what you need. You can sometimes get the seat fixed by welding it.
Carr Industries (site sponsors) has a pretty good SE30 package deal. Give Carmine a call directly and see what he can do for you.
Was this car out of Fayetteville?
Yes, I’m an E30 stalker. . .
I believe that Factory3 Performance also has an E30 starter kit.
JP
Call Bimmerworld and tell them what you wrote above and I’ll bet they can put together a nice little care package for you. It’ll be like Christmas when it arrives days later.
nasaregistrar wrote:
[quote]W.Jones wrote:
[quote]Finally got the E30 home and am chomping at the bit to get started on it! Most immediate items that need replacement are: both front lower ctrl arms, RR wheel bearing, a few significant leaks and probably rod bearings. The front end is pretty much shot, so I am looking for all bushings, ctrl arms, tie rods, and etc. Is there a master bushing kit available? Driver seat is broken on the back support and my local yard doesn’t have a seat so I need to find one. Thanks, Wes
[/url]
[/img][/quote]No master bushing set that I know of.Call one of the forum or Sanction sponsors and they will hook you up with what you need. You can sometimes get the seat fixed by welding it.[/quote]
You can call or e-mail Chris at bimmerparts.com. I got all my stuff from him and he can make a package for you.
Jon
155MPH wrote:
[quote]Was this car out of Fayetteville?
Yes, I’m an E30 stalker. . .
I believe that Factory3 Performance also has an E30 starter kit.
JP[/quote]
Yeah JP, you know the car. Purchased from T&G Engineering in Fayetteville. Tom is a great guy. He is considering putting together a SpecE30 rolling chassis with cage and most of the spec parts to sell to those wanting to get into the class. Tom told me that you have talked with him about this very car, but I had already put a deposit on it.
I talked with Carmine @ Carr and will call Bimmerworld today to get things sorted out. Thanks, Wes