Ride Height and Rear Camber with Race H&R's


#1

My car is an 89 325i coupe.

The rear of my car sits considerably lower than the front after a complete spec e30 suspension install and interior removal. The spring insulators have also been removed. I know the rear wheel arches are lower than the fronts, but the car seems excessively low in the rear. There is a one inch gap between the top of the front wheel arch and my 225/50/R15’s. The rear tires are deep within the wheel arches. What is the typical ride height after a spec suspension install? Post pictures if you have them.

My rear camber is between 2.5-3.0 degrees on both sides. Is this out of the ordinary? What are most people running in the front and rear? What about front caster?

I don’t have my exact alignment specs in front of me, but I will post them tomorrow.


#2

Mine is even all around. Did you check to make sure your front springs are sitting in the correct position? My rear isolators are removed as well.