 |
|
We’ve got a harness near the e-brake that was attached to something but is now loose in the car and can’t find it in the Bentley.
It’s got 3 wires in it.
Solid Blue
Grey/Red
Brown/White
All but the blue were cut back, but it looks like the blue might be been attached to something. We were thinking maybe some type of e-brake switch but don’t see any type of switch on the e-brake.
Car was a auto that was converted to a manual if that makes a difference.
Ideas?
Quick guess would be the Park/Neutral starter cutout switch, since the auto shift mechanism would have had some type of electrical connector. 3 wires sounds about right, but it’s been years since I had reason to deal with one.
Are you having problems or just curious/worried that you’ve snipped something important?
What about the light that lights up P,R,N,D,2,1 on the shifter? I think all the bulbs are blue wires.
John
Jeremy and I originally thought it had something to do with the illumination for the “P,R,N,D,2,1” panel. However, the Park/Neutral starter cutout switch might bit it as well. It’s not causing any issues. We just found it odd that the blue wire was left exposed by the previous owner. I posted about this in the General Discussion forum. Here’s the other thread:
http://spece30.com/component/option,com_kunena/Itemid,86/func,view/id,25055/catid,16/
I think it’s safe to just tape this off and tuck it in with the other center console wires. Thanks for the posts!