 |
|
So - one more thing off the list - looking like a race car.
The wife spent quite a while with the templates - turned out not bad! She cut them out, and told me where to drill for the rivets - all I did was pop the rivets in.
Anyone need panels or templates? I’m sure I can rent her out (just for fabrication - sorry guys).
car looks great, nice and clean. it is always nice to see pics of a full build out. . . . i can better see my future and the work cut out for me.
BTW where did the shift know come from? want to get one like it.
thanx
That is a nice add -
It is from TC Designs
Not on their site - you have to call them. Good guys to work with. Also, not a press fit - it is held with 3 screws - for those that have had the knob fall off in their hand, you know what a benefit that is. Shift lever is out of of my Z3 - slight reduction in throw, and all BMW. I replaced the bushings while I was in there too. Not too bad.
I have one of those to install as well - ask for the Jaffster knob.
bruce
jblack wrote:
[quote]That is a nice add -
It is from TC Designs
Not on their site - you have to call them. Good guys to work with. Also, not a press fit - it is held with 3 screws - for those that have had the knob fall off in their hand, you know what a benefit that is. Shift lever is out of of my Z3 - slight reduction in throw, and all BMW. I replaced the bushings while I was in there too. Not too bad.[/quote]
thanks for the reply. I just put in the bmw z3 short shift kit from bma auto. works great. replaced most of the bushings while under there.
I will be calling tc tomorrow for pricing, like the screws too. much better than the press on oem, yech.
JR