Winding Road Racing - supporting racing with info, products and services from the perspective of the novice, the student and the fan of the underdog.
Welcome, Guest

Shifter mod for AKG and BW "direct" shifters.
(1 viewing) (1) Guest
  • Page:
  • 1

TOPIC: Shifter mod for AKG and BW "direct" shifters.

Shifter mod for AKG and BW "direct" shifters. 5 months, 1 week ago #83378

  • Ranger
  • ( Admin )
  • Posts: 6796
  • Karma: 10
I really like my AKG shifter. This is the one with no shift carrier. It fastens right to the transmission tunnel sheetmetal. What's terrific about it is that with no carrier, there's fewer joints in the mechanisms, so fewer places to add slop to the mechanism. Pair the shifter with the UUC Dual Shear Shift Rod and you have an awesome combo. The problem is that the shifter is too damned short. That means the requirement for absolute precision in your throws is very high. I contacted AKG last year about a longer shift knob, thinking that would lengthen the throw of the shifter and therefore make it less temperamental. They seemed to think that I was a madman. Was an odd conversation.

Some months after that conversation I was telling the tale to Arjun@UUC and he told me to try their tall shift knob. The AKG shift knob is threaded and the UUC knob is designed for an OEM stick, but I got around that by using epoxy to glue the UUC knob on to the threaded portion of the stick. Because of the threads, it will twist back off if one shows sufficient motivation.

The final solution was really terrific. The taller UUC knob fixes the only flaw in the AKG shifter. I'm pretty sure you could rig something similar for the Bimmerworld shifter. The pic shows the long UUC knob on the shifter, and also the shorter original AKG knob.

"Tower, this is Ranger requesting a flyby.
"Negative Ranger the pattern is full."
The following user(s) said Thank You: Garagistic
  • Page:
  • 1
949 Racing - Buy 15x7 6UL +15 Flowformed SE30 Wheels
Time to create page: 0.44 seconds